★ Superior Quality ★
Advanced corrosion protection for the toughest marine conditions. Purpose-built coating systems engineered to perform in saltwater immersion, extreme UV, and the harshest industrial environments.
Our Products
Purpose-built coating systems for marine and industrial applications — each formulation engineered for maximum durability, adhesion, and long-term asset protection.
A high-solids, two-component epoxy primer designed for exceptional corrosion protection and surface tolerance. Ideal for steel structures, marine hulls, and industrial maintenance applications where long-term durability is essential.
A heavy-duty epoxy coating engineered for cargo holds, hatch coamings, and ballast areas. Combines primer and finish in one high-performance system with superior abrasion and impact resistance.
A premium alkyd enamel topcoat delivering outstanding gloss retention and weather resistance. Perfect for topsides, superstructures, machinery, and industrial surfaces requiring a durable decorative finish.
A one-component acrylate SPC antifouling coating designed for underwater hull applications on primed steel or aluminum. Delivers effective biofouling resistance through a self-polishing mechanism that maintains low friction and limits hull degradation. Complies with IMO AFS/CONF/26.
A one-component silyl SPC antifouling engineered to deliver ultimate vessel efficiency and absolute defense against marine growth. Uses predictable self-polishing chemistry to minimise hydrodynamic friction, prevent speed loss, and lower fuel consumption. Complies with IMO AFS/CONF/26.
A one-component acrylate antifouling coating for underwater hull applications on primed steel or aluminum. Delivers biofouling resistance through a self-polishing mechanism that maintains low friction and limits hull degradation. Complies with IMO AFS/CONF/26.
An acrylic, one-component, gloss topcoat suitable for interior and exterior use in marine and industrial environments. Easy application by brush, roll, or spray over properly primed steel and aluminum substrates.
A two-component epoxy topcoat featuring a high gloss finish and remarkable anti-abrasion properties. Ideal for topside applications on exposed marine surfaces, superstructures, decks, and industrial structures.
A two-component, 100% solids amine-cured epoxy system designed for the lining of drinking water reservoirs. Solvent-free, approved for potable water contact, functioning as a complete primer-to-finish system on steel, aluminum, and concrete.
A two-component, high-solids, high-build polyamine-cured epoxy mastic reinforced with glass flakes. Provides enhanced mechanical strength, scratch resistance, and abrasion endurance. Surface tolerant, cures at sub-zero temperatures, usable as primer, intermediate coat, topcoat, or single-coat system.
A two-component, high-performance, polyamine-cured epoxy for superior chemical protection in atmospheric or submerged service. Engineered for internal tank lining on carbon steel, galvanized steel, stainless steel, and concrete — offshore, onshore, and underground.
A one-component alkyd general primer for steel and aluminum surfaces in marine and industrial environments. Provides reliable corrosion inhibition and adhesion for subsequent topcoat application in atmospheric interior and exterior exposed areas.
A two-component polyurethane topcoat with high solids and high gloss finish. Designed to meet demanding conditions in marine and industrial environments where durability and aesthetics are critical. Suitable for topsides, superstructures, refineries, and tank exteriors.
A two-component epoxy sealer providing heavy-duty protection as a mid-coat between epoxy primers and antifouling systems. Multi-surface compatible — suitable for external hulls, underwater areas, boot-top, superstructures, decks, and offshore splash zones.
A two-component polyamine-crosslinked phenolic novolac epoxy lining for versatile chemical containment. Multi-coat application as primer, intermediate, or topcoat in atmospheric or immersion service. Applicable on carbon steel, stainless steel, and concrete.
A high-performance, two-component, solvent-free epoxy fairing compound and filler. Lightweight and flexible formulation with excellent mechanical strength, impact and water resistance, and superior adhesion. Formulated for effortless application, sanding, and pump mixing compatibility.
A three-component silicone-based tie-coat providing the essential adhesion interface between epoxy anticorrosive primers and silicone topcoat systems. Delivers a chemically receptive surface for silicone hydrogel application.
An elite fouling defense coating integrating advanced silicone hydrogel with biocides. Suitable for all vessel types regardless of service speed, including slow/ultra-slow steaming ships and FPSOs. Supports extended service intervals up to 90 months, effective during idle periods up to 120 days. Complies with IMO AFS/CONF/26.
A one-component, physically drying silicone acrylic coating engineered for thermal resistance up to 600°C (1112°F). Serves as a primer, intermediate, or topcoat in multi-layer systems for insulated and uninsulated high-temperature surfaces on aluminum, galvanized steel, stainless steel, and carbon steel.
A one-component, physically drying silicone acrylic coating engineered for thermal resistance up to 250°C (482°F). Serves as a primer, intermediate, or topcoat in multi-layer heat-resistant systems for insulated and uninsulated surfaces on aluminum, galvanized steel, stainless steel, and carbon steel.
A one-component silyl antifouling engineered to deliver ultimate vessel efficiency and absolute defense against marine growth. Uses predictable self-polishing chemistry to continuously renew its protective surface, minimising hydrodynamic friction and lowering fuel consumption. Complies with IMO AFS/CONF/26.
NBC ALKYD THINNER optimizes the flow and application of alkyd products while efficiently thinning coatings for easier spraying or brushing. Also serves as a heavy-duty equipment cleaner for pumps, brushes, and tools, removing residue before and after painting.
NBC EPOXY THINNER optimizes the flow and application of epoxy products while efficiently thinning coatings for easier spraying or brushing. Also serves as a heavy-duty equipment cleaner for pumps, brushes, and tools, removing residue before and after painting.
NBC POLYURETHANE THINNER optimizes the flow and application of polyurethane products while efficiently thinning coatings for easier spraying or brushing. Also serves as a heavy-duty equipment cleaner for pumps, brushes, and tools, removing residue before and after painting.
NBC UNIVERSAL THINNER optimizes the flow and application of acrylic, antifouling, and various products while efficiently thins coatings for easier spraying or brushing. Additionally, it serves as a heavy-duty equipment cleaner for pumps, brushes, and tools, effectively removing residue both before and after painting projects.
Why New Belmont
Every NBC coating system is engineered to meet the real-world demands of marine and industrial service.
Rigorous raw material selection and batch testing means every product ships at spec, every time.
Formulated for salt water, UV, and immersion — the toughest coatings environment on earth.
Trusted on offshore structures, bridges, tanks, pipework, and heavy industrial facilities.
Manufactured in the USA — supporting the industries and communities we serve.
Get In Touch
Fill out the form below or email us directly at [email protected] — we typically respond within one business day.
