STORAGE
The product must be stored in accordance with national regulations. Keep the containers in a dry, shaded, cool, well-ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care. Shelf Life 18 months unopened. Store indoors at 4.5°C (40°F) to 38°C (100°F).
INTENDED USE
Engineered for exterior marine and industrial applications, this compound targets surface imperfections on diverse substrates. This filler is perfect for all external structures, including superstructures, decks, and hulls in both topside and fully submerged zones.
Average Drying Times:
| 10°C (50°F) | 25°C (77°F) | 43°C (110°F) | |
|---|---|---|---|
| Touch | 24 hours | 14 hours | 4 hours |
| Handle | 48 hours | 20 hours | 14 hours |
| Cure | 14 days | 7 days | 3 days |
| Pot life | — | 45 minutes | — |
Drying time is temperature, humidity, and film thickness dependent.
SURFACE PREPARATION
Surface must be clean, dry, and in sound condition. Remove all oil, dust, grease, dirt, loose rust, and other foreign material to ensure adequate adhesion.
Minimum recommended surface preparation: Existing, aged coatings: Ensure adhesion by orbital sanding or hand sanding with aluminum oxide or silicon carbide sand paper with grit P80-P120. Exceeding maximum recoat intervals will require cleaning/abrading by orbital sanding or hand sanding with aluminum oxide or silicon carbide sand paper with grit P80-P120, followed by vacuum cleaning. Before sanding, check if the coating is clean, dry and undamaged.
COLOR & GLOSS VARIATION
Slight deviations in color may occur between production batches of primer and antifouling products. When subjected to atmospheric weathering and solar radiation, these products as well as epoxy-based topcoats, may exhibit chalking. Furthermore, the retention of gloss and color in topcoats depends on several factors. These include the paint type, specific pigment selection, application standards, and environmental conditions such as temperature and UV intensity.
ADDITIONAL NOTES
The product is for professional use only. Personnel shall be trained, experienced, and use the equipment to mix/stir well and apply the product properly. Applicators shall use appropriate personal protection equipment when using this product. Always comply with New Belmont Coatings LLC technical data.
WARRANTY
New Belmont Coatings LLC warrants our products to be free of manufacturing defects in accordance with applicable NBC quality control procedures. Liability for products proven defective, if any, is limited to replacement of the defective product or the refund of the purchase price paid for the defective product as determined by NBC.
DISCLAIMER
The information and recommendations set forth in this Product Data Sheet are based upon tests conducted by or on behalf of New Belmont Coatings LLC. Such information and recommendations set forth herein are subject to change and pertain to the product offered at the time of publication. Published technical data and instructions are subject to change without notice. Contact New Belmont Coatings LLC for additional technical data and instructions.
